According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
This engine was built by Brooks in March of 1883 as No. 887 and marked as scrap [by the GN] in 1937. This engine is known to have worked passenger trains to Brandon. This class of locomotive was replaced by gas-electric [power units] in 1929 but they would be used if no gas-electric was available. Engine 185 sat dead in Minot from the closing of the Brandon line until it was scrapped.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Engine 185, a class B-19 4-4-0 ["American"] type at Minot, ND.
Notes
Small copy neg. Quote in HistoryBio taken from Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern [gas-electric power unit] 2327 & Train at Rugby, ND.
Notes
Built by Brill/Westinghouse in June of 1928; scrapped June 1956. This unit ran with a similar train to Brandon, Manitoba from 1929 until 1936.
Stuckey's notes: When I took this picture I was working on the bridge and building outfit - parked by Bawlf elevator.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Image of CN No. 229 Beulah mixed engine 1389 at McConnell, Manitoba [Mr. Stuckey consistently spelt it "Buelah"], taken along the CNR line, Rapid City substation.
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Interior of CPR roundhouse.
Notes
[Similar] photo published in Canadian Pacific in Manitoba, Volume Two, by L.A. Stuckey
[Mr. Stuckey numbered two envelopes P20. We have kept the same number but designated the first envelope P20(1) and the contents of the second envelope P20(2) and P20(3).]
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Interior of CPR roundhouse.
Notes
Photo published in Canadian Pacific in Manitoba, Volume Two, by L.A. Stuckey
[Mr. Stuckey numbered two envelopes P20. We have kept the same number but designated the first envelope P20(1) and the contents of the second envelope P20(2) and P20(3).]
During the mid-1930s the economy and popularity of light, fast passenger trains were proven in the USA by the Burlington’s "Zephyr", the Rock Island’s "Rocket", and the Milwaukee Road’s "Hiawatha". In 1936 the CPR built engines 3000-3004, designing each to haul a lightweight baggage car and three day coaches. Before being assigned to "The Chinook" between Calgary and Edmonton, engine 3001 and its train made an extensive publicity tour of western Canada.
[Built by Montreal Locomotive Works in 1936, this class of five F2a 4-4-4 locomotives (3000 - 3004) were named "Jubilee" type in honour of the 50th anniversary of CPR transcontinental service. P.E.]
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR streamlined engine No. 3001 & train
Notes
Canadian Pacific Railway's first streamlined engine [class] on display in Brandon
Copy negative LAS with permission
[Mr. Stuckey numbered two envelopes P24. We have kept the same number but designated the first envelope P24(1) and the second envelope P24(2).]
During the mid-1930s the economy and popularity of light, fast passenger trains were proven in the USA by the Burlington’s "Zephyr", the Rock Island’s "Rocket", and the Milwaukee Road’s "Hiawatha". In 1936 the CPR built engines 3000-3004, designing each to haul a lightweight baggage car and three day coaches. Before being assigned to "The Chinook" between Calgary and Edmonton, engine 3001 and its train made an extensive publicity tour of western Canada.
[Built by Montreal Locomotive Works in 1936, this class of five F2a 4-4-4 locomotives (3000 - 3004) were named "Jubilee" type in honour of the 50th anniversary of CPR transcontinental service. P.E.]
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR streamlined engine No. 3001 & train
Notes
Canadian Pacific Railway's first streamlined engine [class] on display in Brandon.
CPR 2816 is a class H1b Hudson-type locomotive built by Montreal Locomotive Works in December 1930. Having logged more than two million miles in active service, 2816 made its final revenue run on May 26, 1960. After a complete three-year rebuild, 2816 was restored to its original specifications with external details from the 1930/40s, and re-entered active service in 2001 as a roving ambassador for Canadian Pacific Railway. [Information from Canadian Pacific Railway's website - www.cpr.ca. P.E. 28/07/09]
First engine on CPR's western lines with smoke deflectors - aka "elephant ears".
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR Engine 2816 being serviced on [passenger train] No. 3
Notes
Note image of L.A. Stuckey as 15-year-old boy in foreground
Copy negative
From the collection of the [UK] National Railway Museum, Leeman Road, York, England.