The building near the back of the train was the original Salvation Army Citadel. Built in 1889, it was purchased by Wm. Graham in 1910 and moved to the west side of the 300 block of 10th St. It had to be moved to build the Prince Edward Hotel and eventually became part of "Billy" Graham's dance hall.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Northern Pacific and Manitoba Railway engine No. 5, with passenger train
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 208 & passenger train, Brandon, Manitoba.
Notes
Great Northern Railway engine 208 was a class B-21 4-4-0 ["American" type], built by Rogers in 1887. It had 18x24" cylinders and 63" drivers.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 208 & passenger train, Brandon, Manitoba.
Notes
[Great Northern Railway engine 208 was a class B-21 4-4-0 ["American" type], built by Rogers in 1887. It had 18x24" cylinders and 63" drivers.]
According to Stuckey and Bain (1996), the Great Northern opened its line from the US border to Gretna and Portage La Prairie, Manitoba on March 11, 1907. It was subsequently purchased in 1909 by the Manitoba Great Northern Railway Company – a wholly owned subsidiary of the Great Northern Railway. In 1926 the 76.14 miles of track from Portage La Prairie to Gretna was abandoned, with the exception of a 25 mile section from Carman to Plum Coulee, which was sold to the Canadian Pacific Railway. (p. 16)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 224 & passenger train, Gretna, Manitoba.
Notes
Great Northern Railway engine 224 was a class B-21 4-4-0 ["American" type], built by Rogers in 1887. It had 18 x 24 inch cylinders and 63 inch drivers.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 208 & passenger train, Hayfield, Manitoba.
Notes
[Great Northern Railway engine 208 was a class B-21 4-4-0 ["American" type], built by Rogers in 1887. It had 18x24" cylinders and 63" drivers.]
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Canadian Pacific Railway Station looking west from overhead [Eighth Street] bridge
Notes
Date determination: Engine 93 (ex 375) received Series 2 numbering in Sept. 1907 and repainting is still clean; some trees have leaves so could be Sept. 1907 but more likely May 1908.
[For specific information regarding this photo (which was used to create a postcard) see "Brandon History in Postcards" by Jack Stothard, Manitoba History, Number 56, October 2007, page 35. P.E.]
During the mid-1930s the economy and popularity of light, fast passenger trains were proven in the USA by the Burlington’s "Zephyr", the Rock Island’s "Rocket", and the Milwaukee Road’s "Hiawatha". In 1936 the CPR built engines 3000-3004, designing each to haul a lightweight baggage car and three day coaches. Before being assigned to "The Chinook" between Calgary and Edmonton, engine 3001 and its train made an extensive publicity tour of western Canada.
[Built by Montreal Locomotive Works in 1936, this class of five F2a 4-4-4 locomotives (3000 - 3004) were named "Jubilee" type in honour of the 50th anniversary of CPR transcontinental service. P.E.]
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR streamlined engine No. 3001 & train
Notes
Canadian Pacific Railway's first streamlined engine [class] on display in Brandon
Copy negative LAS with permission
[Mr. Stuckey numbered two envelopes P24. We have kept the same number but designated the first envelope P24(1) and the second envelope P24(2).]
During the mid-1930s the economy and popularity of light, fast passenger trains were proven in the USA by the Burlington’s "Zephyr", the Rock Island’s "Rocket", and the Milwaukee Road’s "Hiawatha". In 1936 the CPR built engines 3000-3004, designing each to haul a lightweight baggage car and three day coaches. Before being assigned to "The Chinook" between Calgary and Edmonton, engine 3001 and its train made an extensive publicity tour of western Canada.
[Built by Montreal Locomotive Works in 1936, this class of five F2a 4-4-4 locomotives (3000 - 3004) were named "Jubilee" type in honour of the 50th anniversary of CPR transcontinental service. P.E.]
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR streamlined engine No. 3001 & train
Notes
Canadian Pacific Railway's first streamlined engine [class] on display in Brandon.
CPR 2816 is a class H1b Hudson-type locomotive built by Montreal Locomotive Works in December 1930. Having logged more than two million miles in active service, 2816 made its final revenue run on May 26, 1960. After a complete three-year rebuild, 2816 was restored to its original specifications with external details from the 1930/40s, and re-entered active service in 2001 as a roving ambassador for Canadian Pacific Railway. [Information from Canadian Pacific Railway's website - www.cpr.ca. P.E. 28/07/09]
First engine on CPR's western lines with smoke deflectors - aka "elephant ears".
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR Engine 2816 being serviced on [passenger train] No. 3
Notes
Note image of L.A. Stuckey as 15-year-old boy in foreground
Copy negative
From the collection of the [UK] National Railway Museum, Leeman Road, York, England.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern [gas-electric power unit] 2327 & Train at Rugby, ND.
Notes
Built by Brill/Westinghouse in June of 1928; scrapped June 1956. This unit ran with a similar train to Brandon, Manitoba from 1929 until 1936.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
This engine was built by Brooks in March of 1883 as No. 887 and marked as scrap [by the GN] in 1937. This engine is known to have worked passenger trains to Brandon. This class of locomotive was replaced by gas-electric [power units] in 1929 but they would be used if no gas-electric was available. Engine 185 sat dead in Minot from the closing of the Brandon line until it was scrapped.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Engine 185, a class B-19 4-4-0 ["American"] type at Minot, ND.
Notes
Small copy neg. Quote in HistoryBio taken from Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.