For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR Ice House Fire with engine 701
Notes
This large ice house, located between the CPR tracks and Assiniboine Avenue at 3rd Street, was filled with blocks of ice from the Assiniboine River each winter. It had a long high platform for [loading ice blocks into] refrigerator cars, and also handled charcoal braziers for heating these same cars in winter. The new ice house structure that was built after this fire was much smaller, as it had an artificial ice plant.
With mechanically temperature-controlled cars replacing ice-cooled refrigerators, it was demolished in the 1970's.
This photograph shows how steam switch engines were used as fire engines. A hose carried in a box under the tender was fitted into a branch of the boiler feed pipe (discharge pipe). When the injector was turned on it gave a nozzle pressure of over 200 psi.
CPR 2816 is a class H1b Hudson-type locomotive built by Montreal Locomotive Works in December 1930. Having logged more than two million miles in active service, 2816 made its final revenue run on May 26, 1960. After a complete three-year rebuild, 2816 was restored to its original specifications with external details from the 1930/40s, and re-entered active service in 2001 as a roving ambassador for Canadian Pacific Railway. [Information from Canadian Pacific Railway's website - www.cpr.ca. P.E. 28/07/09]
First engine on CPR's western lines with smoke deflectors - aka "elephant ears".
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR Engine 2816 being serviced on [passenger train] No. 3
Notes
Note image of L.A. Stuckey as 15-year-old boy in foreground
Copy negative
From the collection of the [UK] National Railway Museum, Leeman Road, York, England.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 208 & passenger train, Brandon, Manitoba.
Notes
Great Northern Railway engine 208 was a class B-21 4-4-0 ["American" type], built by Rogers in 1887. It had 18x24" cylinders and 63" drivers.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 208 & passenger train, Brandon, Manitoba.
Notes
[Great Northern Railway engine 208 was a class B-21 4-4-0 ["American" type], built by Rogers in 1887. It had 18x24" cylinders and 63" drivers.]
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 538
Notes
Great Northern Railway engine 538 was a class F-1 2-8-0 ["Consolidation" type], and often worked freight trains to Brandon.
According to Stuckey and Bain (1996), “The Brandon, Saskatchewan & Hudson’s Bay Railway was built and operated as a totally owned subsidiary of the Great Northern Railway. Construction commenced in late 1905 and by the end of 1905, less than a mile of track had been laid north of the boundary at St. John. In 1906, the remaining 68.6 miles to Brandon were laid and service commenced that year. During the Depression of the 1930s, traffic declined significantly and the entire branch was abandoned in 1936. Over much of the branch’s length, the ties and rails were laid on the prairie without ballast and today little remains of the line apart from traces where there were cuts and bridges.” (p. 18)
Stuckey, L. A., & Bain, D. M. (1996). The Great Northern and Northern Pacific railways in Canada. Calgary, Alberta: British Railway Modellers of North America.
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
Great Northern Railway engine 716
Notes
Great Northern Railway 4-8-0 class G-3 locomotives were known to have worked freight trains to Brandon.
During the mid-1930s the economy and popularity of light, fast passenger trains were proven in the USA by the Burlington’s "Zephyr", the Rock Island’s "Rocket", and the Milwaukee Road’s "Hiawatha". In 1936 the CPR built engines 3000-3004, designing each to haul a lightweight baggage car and three day coaches. Before being assigned to "The Chinook" between Calgary and Edmonton, engine 3001 and its train made an extensive publicity tour of western Canada.
[Built by Montreal Locomotive Works in 1936, this class of five F2a 4-4-4 locomotives (3000 - 3004) were named "Jubilee" type in honour of the 50th anniversary of CPR transcontinental service. P.E.]
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR streamlined engine No. 3001 & train
Notes
Canadian Pacific Railway's first streamlined engine [class] on display in Brandon
Copy negative LAS with permission
[Mr. Stuckey numbered two envelopes P24. We have kept the same number but designated the first envelope P24(1) and the second envelope P24(2).]
During the mid-1930s the economy and popularity of light, fast passenger trains were proven in the USA by the Burlington’s "Zephyr", the Rock Island’s "Rocket", and the Milwaukee Road’s "Hiawatha". In 1936 the CPR built engines 3000-3004, designing each to haul a lightweight baggage car and three day coaches. Before being assigned to "The Chinook" between Calgary and Edmonton, engine 3001 and its train made an extensive publicity tour of western Canada.
[Built by Montreal Locomotive Works in 1936, this class of five F2a 4-4-4 locomotives (3000 - 3004) were named "Jubilee" type in honour of the 50th anniversary of CPR transcontinental service. P.E.]
Custodial History
For custodial history see the collection level description of the Lawrence Stuckey collection.
Scope and Content
CPR streamlined engine No. 3001 & train
Notes
Canadian Pacific Railway's first streamlined engine [class] on display in Brandon.
Photograph was given to Fred McGuinness by Linda Bilkoski (nee Lepard) of Lac du Bonnet, MB.
Scope and Content
Photograph shows the remains of the Syndicate Block after the fire in January 1916. The building is situated on the southwest corner of Seventh Street and Rosser Avenue. Ice from the firefighting process covers the building. The tailor shop J.S. Laughton & Son (701 Rosser Avenue) can be seen on the north side of Rosser Avenue.
.jpg?width=1200&404=no-img.jpg&watermark=wmk)
.jpg?width=180&404=no-img.jpg)
.jpg?width=1200&404=no-img.jpg&watermark=wmk)
.jpg?width=180&404=no-img.jpg)
){kind=link}
){kind=link}
.jpg%3fmaxheight%3d1000%26maxwidth%3d1000%26watermark%3dwmk&description=CNR+Engine+1346+After+Storm){kind=link}
.jpg%3fmaxheight%3d1000%26maxwidth%3d1000%26watermark%3dwmk&description=CPR%27s+First+Streamlined+Engine+Class){kind=link}
.jpg%3fmaxheight%3d1000%26maxwidth%3d1000%26watermark%3dwmk&description=CPR+engine+3001+and+train+-+Brandon%2c+Manitoba){kind=link}
